Page 1 of 1
L-134 HEAD
Posted: Tue Mar 23, 2010 1:01 pm
by COPPER
whats the torque setting for the head bolts on a L-134 engine an the torque pattern
Posted: Tue Mar 23, 2010 7:28 pm
by Scott21
TM1804A page 97 in the download section
Scott
Posted: Tue Mar 23, 2010 10:09 pm
by wesk
Scott is correct. It is in that manual and the manual is free on our downloads page and we all know the manual is a must have when tearing down the engine.
There are some items one needs to consider:
1-Are you using studs or bolts?
2-Remember the torque figures given in the manual are for clean dry threads. And in most manuals they are for use with studs which have fine thread nuts. Bolted heads have coarse threaded bolts.
3-Be sure to apply Permatex #1 or 2 sealant to the threads of the bolts or studs just before you install them since several tapped holes are open to the water jackets. Leave the first 3 or 4 threads of the bolt or stud clean and dry.
Posted: Wed Mar 24, 2010 6:04 am
by COPPER
thank you every much