Where are the "Y"'s
Posted: Sun Apr 11, 2010 4:58 am
I am looking for the metal vacuum hose connector "Y"'s for the wiper hoses on my M38. Any ideas?
Page 1 of 1
wye s
Posted: Sun Apr 11, 2010 8:19 am
got mine at NAPA...no metal only plastic ones
Posted: Sun Apr 11, 2010 1:33 pm
Some hobby stores sell small copper tubing. You
could get one the proper diameter for your hose,
drill a hole in it, and solder a short piece to that.
Paint it an appropriate color. The remainder may
prove useful somewhere else in the system.
Jim in Darkest Arkansas
could get one the proper diameter for your hose,
drill a hole in it, and solder a short piece to that.
Paint it an appropriate color. The remainder may
prove useful somewhere else in the system.
Jim in Darkest Arkansas
Posted: Sun Apr 11, 2010 4:01 pm
I think Zane Gross (member) has some NOS..
Posted: Sun Apr 11, 2010 5:44 pm
I had some but I sold tom my last extra one I need all the other ones I have.
Posted: Sun Apr 11, 2010 8:56 pm
I believe Jon Ramsdell Had some also. You can use the nylon for now and these do pop on at vendors and on Ebay occasionally. Keep in mind that the proper hose to use is not 1/4" but 7/32".