willysmjeeps.com

Posted: **Fri Jun 25, 2010 7:46 pm**

Hi
I need information about Sparton Turn Signal MS-53051-1
How to connect the 6 wires marked with letters B , C , D , E (red) , F and G.
Any Circuit Draw?
Is to install in my 1966 M606 jeep!

Thanks in advance!
Here some pics

Regards

Posted: **Fri Jun 25, 2010 9:58 pm**

Luis,

Do you have the terminal/relay box that comes with that switch kit?

Posted: **Sat Jun 26, 2010 6:25 pm**

Hi Wes!
Thank you very much!!
Now i have the info , and I must look now the relay box!

I found one on Ebay http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=46093 and Saturn Surplus has new! http://saturnsurplus.com/electrical/0155.htm .

Anyone have photo of the inside of this box?

Thanks in Advance

Cheers

Posted: **Sat Jun 26, 2010 7:12 pm**

There were several interior photos of the box in my email to you.

Posted: **Sat Jun 26, 2010 8:11 pm**

Wes
Thanks !!

I was thinking ... my M606 jeep has 12-volt electrical System.
I can use this Relay control box or is made for 12 and 24 volts?

Cheers

Posted: **Tue Jun 29, 2010 5:24 am**

Found on the web. exactly on a M715 forum , details inside the box and how to reform it to 12 volts.

Will study more about the topic!
A challenge for my ignorance in electronic!

Cheers

Posted: **Tue Aug 17, 2010 11:09 am**

Wes
Thank you for the pics!!
Best Regards!