Page 1 of 1
Looking for M38A1 frame specs
Posted: Mon Jun 28, 2010 3:18 am
by tkjeeper
Just sent the frame to be blasted, have a few brackets rotted off. I couldn't find a pdf file for the frame of my M38A1, anyone have a link that could help. I tried searching but too large parameters I guess. Thanks all
Posted: Mon Jun 28, 2010 9:14 am
by wesk
I don't believe we have any frame spec sheet loaded in any form. The TM 9-8015-2 covers frame and frame alignment checks with dimensions. You can download that manual on our downloads page. I also have an assortment of A1 frame photos on my photo storage site at:
http://mdframe.mypicgallery.com/
and:
http://mdrunninggear.mypicgallery.com/
and:
http://m38a1tubmounts.mypicgallery.com/
You can download the photos you need and cut out the parts you need and post them asking for the parts or measurements on the "Wanted" board.
Posted: Mon Jun 28, 2010 2:16 pm
by Zane
ive got a couple m38a1 frames im getting ready to scrap, let me know what you need, thanks Zane
frame
Posted: Mon Jun 28, 2010 4:29 pm
by hillbilly21
Better Yet you can come over to my house and get a perfect M38A1 rolling chassic with a good MD engine in it ..500.00 cash !!!!!!!!!
Re: frame
Posted: Mon Jun 28, 2010 5:19 pm
by tkjeeper
hillbilly21 wrote:Better Yet you can come over to my house and get a perfect M38A1 rolling chassic with a good MD engine in it ..500.00 cash !!!!!!!!!
Now Hillbilly, thats just mean! I got mine for $500 also but with fenders, hood, grill and a couple of rotten tubs, however the chassis will need some work. Believe me if I were near you I'd be all over that! Then again, probably good for my marriage that I'm not that close. Thanks all.
Posted: Mon Jun 28, 2010 5:20 pm
by tkjeeper
Zane wrote:ive got a couple m38a1 frames im getting ready to scrap, let me know what you need, thanks Zane
Nice of you Zane, I'll keep that in mind. I appreciate the offer.
frame
Posted: Mon Jun 28, 2010 5:33 pm
by hillbilly21
YOU ONLY LIVE ONE TIME !!!!!
I AM SURE ZANE WOULD CUT UP ONE OF HIS FRAMES FOR YOU ..