Page 1 of 1
Copper Vent Lines
Posted: Thu Jul 22, 2010 8:53 pm
by OKCM38CDN
I am no longer making the vent lines...
Demand is not there and to be honest my interest is lacking...
Sorry....
Posted: Fri Jul 23, 2010 5:06 pm
by Jeeps4Brains
Dang! I guess I will have to make my own! I have all the fittings but no lines. Too late.
Posted: Fri Jul 23, 2010 9:25 pm
by OKCM38CDN
You can find the 3/16" copper tubing at referigeration / air conditioning repair supply stores... the place where your AC repair guy buys his parts...
It comes in rolls of 50' and runs about $35 per roll...
Hope this helps...
Copper Tubing
Posted: Mon Jul 26, 2010 11:56 pm
by Yarder
I just bought copper tubing at the local True Value Hardware store. Got it for about a dollar a foot, cut to size.
Picked up the brass fittings in a display at the local NAPA store. Also about $1.50 each.
I have a flaring tool, which is needed to flare out the ends. Had to remember to correctly orientate the brass fitting on the tube BEFORE I flared it out!
Posted: Tue Aug 10, 2010 8:39 pm
by Cacti_Ken
some automotive parts stores will sell it buy the foot also.