Page 1 of 1
Do you think this a M38A1C?
Posted: Fri Aug 13, 2010 11:26 pm
by linx310
Do you think this a M38A1C that has been bubbadized?
Notice the notch in the windshield and how it has had a tail gate installed. Also note the spare tire installed on the side.
Ad description says it was used in Germany.
He wants $2,500 for it (way to much imho for a normal M38a1 in that shape).
http://houston.craigslist.org/cto/1850763190.html
Posted: Sat Aug 14, 2010 9:36 am
by miljeep
It should tell you on the data plate, if its the original
Posted: Sat Aug 14, 2010 8:33 pm
by linx310
It should tell you on the data plate, if its the original
I thought the data plates where the same as a regular M38a1 and they were modified after the fact?
I am probably wrong though...
Posted: Sun Aug 15, 2010 2:00 am
by wesk
It looks like it may be one. Take a look at some photos at:
http://m38a1c.mypicgallery.com/
I do not recall any difference in the dash data plates. There is a kit data plate that is installed on the rear right panel.
Posted: Mon Aug 16, 2010 8:14 am
by Hassie
I am restoring an M38A1C and need the 106 data plate and the spare tire mount shown in the photos. Anyone know where I can find same??
Thanks,
Don in Auburn, CA.
Posted: Fri Sep 17, 2010 7:25 pm
by Claudio
Hi, There is a guy named Robert Dudkovski in Polen that reproduces all kinds of MV plates. He may have the original pattern, otherwise you can send him a photo with descriptions of the plate. He has the correct fonts.
If you are actually interested, I can take a look at my list of e-mails and lateron inform you. I bought a pair of plates for my M170 from him that are very close to originals, at a reasonable price.