M38a1 dissasembled and assembled in 4 mins
Posted: Mon Sep 13, 2010 4:45 pm
This is something you dont see every day !!!! http://www.youtube.com/watch?v=lgwF8mdQ ... r_embedded
willysmjeeps.com
Willys Military Jeep Forum
https://willysmjeeps.com/
M38a1 dissasembled and assembled in 4 mins
Page 1 of 1
Posted: Mon Sep 13, 2010 9:13 pm
Yes that was a pretty good flick. But I'd like to see their time with a real bolted together jeep! With the exception of the wheel lugs the rest of the disconnect points were quick release pins and they were actually complete sub-assemblies not individual pieces.
Posted: Tue Sep 14, 2010 6:03 pm
I would like to know how they disconnected the radiator without spilling a drop of water, 
the fuel lines as well, the whole jeep was designed to come apart.
the fuel lines as well, the whole jeep was designed to come apart.4 min assembly
Posted: Tue Sep 14, 2010 6:11 pm
Yeah ,i would like to have seen how the drive shaft was connected at he joints !! They could have run it with no water for a short time .Just some body with too much time to show off .It is still cool to see this in the street even it is for show .