Page 1 of 1
Shock absorbers
Posted: Wed Dec 07, 2005 12:39 am
by Cacti_Ken
I was wondering about the price of shock absorbers (Monroe gas shocks)from NAPA for $13.50. Anyone know if the one NAPA sells would be good to put on the M38. I don't know if the jeep is suppose to have heavy duty shocks or what. Maybe the more expensive shocks I have seen in our hobbies vendors price list are better or heavy duty. What kind of shocks do you guys use? I don't plan on doing any hill jumping or rough driving.
Posted: Thu Dec 08, 2005 5:57 pm
by Bob_C
I had to get shocks from NAPA as the supposed-to-be repro ones did not extend far enough as my jeep has (I think) 2inch higher lift springs.
The NAPA shocks will do just fine. You can just measure the distance between the two mounting points, and tell the NAPA guy. He should be able to find something to fit. The last thing you want is for the jeep to compress too much or extend to much, which would at least damage / most likely destroy the shocks.
Posted: Sat Dec 10, 2005 6:08 pm
by DougK
My original shocks on the m38 had seen better days. I took them off and showed them to a local supplier of shocks. He ordered the same from Monroe. They came in blue but that is what Scotch Brite and OD is for.
They came out just like the originals.