Page 1 of 1
CRAZY QUESTION
Posted: Sun Jan 09, 2011 3:56 pm
by COPPER
I have a 1952 M38 with a L-134 engine it started smoking real bad remove plugs an found #4 real wet. remove plug wire an ran out as good as any .how safe is it to run on three cylinders .it has a 24 volt system
Posted: Sun Jan 09, 2011 9:08 pm
by wesk
It is hard on the crank bearings due to the uneven loading. Try installing a non-fowling plug adapter on that bad cylinder or go to a hotter plug in that cylinder.
Posted: Mon Jan 10, 2011 6:58 pm
by COPPER
wes were can i get that type plug an adapter