Page 1 of 1
Long, steering drag link?
Posted: Mon Feb 28, 2011 8:56 pm
by JAM
Anyone have information on the length between the balls joint of bellcrank and pitman arm steering drag link?
The question is because I suspect that the previous owner had installed another non Willys steering gear, and the drag link is tricked.
Jose Angel
Posted: Tue Mar 01, 2011 8:19 am
by MODIFIED
I have a Take- out spare that measures (C-C) between large bore at 23.5 "
Posted: Tue Mar 01, 2011 8:01 pm
by JAM
MODIFIED Thanks, mine is 24" but the suspicion was founded by this.,,,
also the steering gear was no "Ross" and had the welded pitman
Posted: Tue Mar 01, 2011 8:39 pm
by MODIFIED
below is a takeoff from an M38A1 spare "For Sale" if your interested. cleaned, primed, and ready for paint.
$30 + shipping I also have the internal parts if you need.
Posted: Wed Mar 02, 2011 8:06 am
by jimbob
How much do you want for the rear lifting shackle brackets?
Jim
Posted: Wed Mar 02, 2011 12:32 pm
by MODIFIED
jimbob wrote:How much do you want for the rear lifting shackle brackets?
Jim
Gents, just finishing inventory of parts to sell. Will post a large for sale ad with parts shown above along with several others........TIME FOR SPRING CLEANING!!!!!!!!!!!!!!!
pm'd you Jim