fuel tank

11cgrunt · Post by **11cgrunt** » Mon Mar 28, 2011 10:00 am

on my 51 m38, the fuel tank has 2 fittings on top. which one is for the carb. and what is the other one for. I dont have a manual so im working off minimal knowledge. Or are there down loads for the fuel system?

Matt R

RICKG · Post by **RICKG** » Mon Mar 28, 2011 10:11 am

ONES THE FUEL PICKUP AND FILTER, THE OTHERS THE FUEL
LEVEL SENDING UNIT TO THE GAUGE.
THERES A TON OF INFO IN THE DOWNLOADS.
GO TO TM9-8012 PG166 PAR133 FIG 50.

11cgrunt · Post by **11cgrunt** » Mon Mar 28, 2011 10:30 am

Found it. Was hard for me to navigate this document area. Thank you very much. I think ill print this whole book out when i get to the shop.
Matt R

Zane · Post by **Zane** » Mon Mar 28, 2011 10:32 am

the other fitting is for the vent line going to the air breather for deep water fording, if you dont install the line get a screw on vent fitting off an m38a1 tank.

RICKG · Post by **RICKG** » Mon Mar 28, 2011 10:32 am

YOU GOT IT MATT-THE DOWNLOADS SECTION IS A GOLDMINE.

11cgrunt · Post by **11cgrunt** » Mon Mar 28, 2011 10:40 am

Yes it is. I really need to buy that green m38 book. But $60+ is too pricey.

Matt R

RICKG · Post by **RICKG** » Mon Mar 28, 2011 10:58 am

BUT LOOK AT THIS WAY, MATT-WITH THE CORRECT INFO,
DOING IT RIGHT THE 1ST TIME, THAT 60 BUCKS IS LIKE
MONEY IN THE BANK

11cgrunt · Post by **11cgrunt** » Mon Mar 28, 2011 12:57 pm

Ive posted on the wanted section. To see if anyone want to trade some parts for a book. I have the all American wonder volumes, They proved invaluable. I do need to get the book, But have other priorities.

Matt R