Page 1 of 1
Ramsey 50
Posted: Sat Apr 16, 2011 3:07 pm
by giacomo
Hi all,
which it is the oil lubricant for the winch?
thank you
giacomo
Posted: Sat Apr 16, 2011 11:25 pm
by wesk
TM 9-804 M38 operation Pg 168 90 wt gear oil is called out but worm and screw oil is best.
TM 9-8012 M38 operation, TM 9-804A & TM 9-8014 M38A1 operations don't tell you what lube to use.
Posted: Sun Apr 17, 2011 12:52 am
by giacomo
Hi wesk,
thank you, you are always the technician n.°1
therefore 80W/90 it could go well ?
what is worm and screw oil ? which brand is?
giacomo
Posted: Sun Apr 17, 2011 3:04 am
by wesk
I do not know where you are located. The best bet for you to find some locally is for you to call or visit your nearest agricultural equipment shop. They'll know what you need and where to get it.
You can also email or call Ramsey Winch company for their choice of modern lubricant's for the 50/50R winch.
Posted: Sun Apr 17, 2011 1:57 pm
by giacomo
I live in Italy, and I do not know the worm and scrw oil.
giacomo
Posted: Sun Apr 17, 2011 4:52 pm
by wesk
There are no agricultural equipment shops in Italy? No tractors in Italy?
Posted: Mon Apr 18, 2011 12:24 am
by giacomo
yes there are, but I do not succeed to understand which oil I would have to acquire.
giacomo
Posted: Mon Apr 18, 2011 10:58 am
by wesk
Tell them you want a quality "worm and screw" type gear box oil.
Posted: Mon Apr 18, 2011 1:51 pm
by giacomo
Ok wesk,
but when I ask this oil, than gradation he must have?
moreover the winch mounted on the M38A1 is a Ramsey 50/or 50R, but which it is its exact code of acknowledgment?
giacomo
Posted: Mon Apr 18, 2011 5:38 pm
by wesk
The winch data plate will tell you it's model number. Also the Model 50 is a 3500 Lb winch and the Model 50R is a 5000 LB winch. If you have no data plate or no Ramsey marking on it then it may well be one of many European built copies.
Posted: Tue Apr 19, 2011 12:54 am
by giacomo
Hi wesk
unfortunately I have no data plate ,
how I make to understand if it is a European built copies ?
thank you
giacomo
Posted: Tue Apr 19, 2011 8:07 am
by wesk
If you have no data plate or no Ramsey marking on it then it may well be one of many European built copies.
Ramsey built in USA
Ramsey built USA
Euro Reproduction in cast iron case.
Posted: Wed Apr 20, 2011 5:25 am
by giacomo
Hi wesk,
perhaps also I have I model European.built copie ,
but " GDP "is the factory brand?
as soon as I can I insert of the pics
Posted: Wed Apr 20, 2011 8:48 am
by wesk
The copied units we have seen have the GDP on them. I have heard that the company was building them under license from Ramsey but can't find any evidence to support that.