Turn signal plug
Posted: Fri Jun 24, 2011 7:47 am
Hi all,
I'm fitting turn signals to my M38.
I'm using M series bits because I have them lying around from my Reo's.
The bit I don't have lying around is the plug that screws the harness into the indicator stalk on the column and possibly not the plug that screws the harness into the flaser unit.
I'll make the intermeadiate harness up myself if I could get these plugs with six inches of wiring attached, which is a problem in the UK as I can't find any Reo's ect getting broke.
Anybody know where I might be able to get these bits?
Thanks,
Dave.
I'm fitting turn signals to my M38.
I'm using M series bits because I have them lying around from my Reo's.
The bit I don't have lying around is the plug that screws the harness into the indicator stalk on the column and possibly not the plug that screws the harness into the flaser unit.
I'll make the intermeadiate harness up myself if I could get these plugs with six inches of wiring attached, which is a problem in the UK as I can't find any Reo's ect getting broke.
Anybody know where I might be able to get these bits?
Thanks,
Dave.
