Page 1 of 1
DOUGLASS CONNECTORS
Posted: Wed Aug 10, 2011 2:49 pm
by RICKG
Any tips on getting the douglas connectors to go together?
It just seems like it takes an unreasonable amount of
force to get the shells to engage. I've resorted in a couple of
places to grinding the connector slightly and am using di-electric
grease. Any advice??
Re: DOUGLASS CONNECTORS
Posted: Wed Aug 10, 2011 6:15 pm
by bubagun
RICKG wrote:Any tips on getting the douglas connectors to go together?
It just seems like it takes an unreasonable amount of
force to get the shells to engage. I've resorted in a couple of
places to grinding the connector slightly and am using di-electric
grease. Any advice??
Sopunds like you got a good bead on it..
Posted: Wed Aug 10, 2011 7:29 pm
by sonny
I don't know if it hurts anything or not but on my problem connectors, I put liquid soap on the rubber parts - problem solved - Sonny
Posted: Thu Aug 11, 2011 8:20 am
by MODIFIED
Silicon Spray. good protection for the Rubber Grommet and wires too.
Posted: Fri Aug 12, 2011 10:08 am
by RICKG
Silicone spray-why didn't i think of that..works good!!
Thanks for the suggestions guys..