Page 1 of 1
Water outlet on M38 chassis?
Posted: Sat Nov 19, 2011 1:35 pm
by Herrmann_Sherman
CJ3A has some on the left and on the right side.
What happended to the M38 if the chassis was filled with water?
Does he also have outlet holes?
I can´t have a look on mine, I have a CJ-Body
Thank you for info
Regards
Herrmann_Sherman
Posted: Sat Nov 19, 2011 2:05 pm
by wesk
I am not sure what you are describing. The M38 chassis (frame) although boxed in the front and a couple of places aft is still open at the ends of the boxed area and allows quick draining.
Posted: Sat Nov 19, 2011 2:20 pm
by Herrmann_Sherman
Sorry Wesk for my inexplicid wording. What I mean is not the chassis but the body...
The drain holes in the body...on the CJ-Body is one at each side...M38 body is closed...
Posted: Sat Nov 19, 2011 2:29 pm
by Herrmann_Sherman
Posted: Sat Nov 19, 2011 2:49 pm
by whydahdvr
Wes, correct me, but the M38 has drain holes in the floor - driver's side and passenger. They have wing-shaped metal flanges that can be rotated open or closed. Those act in the same way as the permanently open cut-outs on the CJ3Q body.
Posted: Sat Nov 19, 2011 3:08 pm
by wesk
Yep. If your M38 has no floor drains someone has modified the floor panels.
Posted: Sun Nov 20, 2011 4:35 am
by Herrmann_Sherman
Thank you guys for helping me. Now I know.
Yes, floor panels are modified
