Page 1 of 1
Passenger seat height
Posted: Fri Feb 03, 2012 5:36 pm
by Bretto
I have looked over a few pics and the passenger seat back height looks to be just slightly lower than that of the driver's. I was fitting up my frames and noticed that before I got to looking around at the pics to compare. So now I'm not so alarmed, but why? I guess I should rephrase and say the frame isn't lower, its that the whole frame sits lower in the tub.
Posted: Fri Feb 03, 2012 6:41 pm
by Bretto
I think it occurred to me know after pondering it a bit. Its the driver side that is higher. To accommodate the larger tank. Bells are a little slow to ring sometimes with me.
Brett
Posted: Fri Feb 03, 2012 8:23 pm
by oilleaker1
Had the same problem with mine, go look at the Willys' Overland original new Jeeps in the lot. That's stock! No problem now. John
Posted: Sat Feb 04, 2012 1:32 pm
by maeserik
Seemes to be normal, mine has the same 'problem'. Maybe to allow the driver to see better at the right side ?
Erik