Page 1 of 1
rear seat
Posted: Tue Feb 21, 2012 9:20 pm
by 12B
Can any one direct me to a good photo or diagram of all the pieces and parts I need to add/assemble a rear seat for my M38? I have what I would guess is the rear seat support (Large square U shape) and the rear pivot bracket (round u shape) already attached to the sides of my bed. What else do I need and how does it go together?
Posted: Wed Feb 22, 2012 5:54 am
by Bretto
You should go take a look at the photo gallery page, you're sure to find some pictures of it there.
Posted: Wed Feb 22, 2012 8:20 am
by swat
TM9-8012, figure 135 on page 316 details the bracket and rear seat. You can download the pub from this site.
Posted: Wed Feb 22, 2012 4:43 pm
by evanso1975
There's a couple of decent photos of the rear seat here:
http://www.garbee.net/~cabell/m38pages/m38photos8.htm
Check out the message boards on the "G" (
http://www.g503.com ). Apart from being a bit narrower, the WW2 jeep rear seats were pretty much identical. You should also do a google image search for "M38 rear seat". Surprising what comes up. And if you're looking to buy, the M38A1 seat is the same as the M38.
Owen.