Page 1 of 1
24V TEST EQUIPMENT
Posted: Mon Feb 27, 2012 12:44 pm
by RICKG
Have been collecting 24V test equipment-anticipating
the day i'll need it. Recent aquisitions are a 12-24V
timing lite mfg by Sun and a complete test adapter set
mfg by Mcgraw.
Never too early to start aquiring tools you know you'll
need sooner or later. Looks good on the bench too!!
Posted: Mon Feb 27, 2012 1:25 pm
by wilfreeman
Yeah, I bought my adapter set about 12yrs ago for $15 - wish I would have bought all he had in stock! I just use my 12v timing light connected to one battery - seems to work ok. Are there any engine testers/analyzers made for our vehicles? This is an area I haven't explored yet.
Posted: Mon Feb 27, 2012 7:24 pm
by AeroE
While not on the subject of 24V, but on tools, I’ve been slowly accumulating the special tools and fixtures shown in TM-804, 8012, & 1804A. Recently I acquired the valve/clutch spring tester, rod aligner, and compression gauge exactly as illustrated in our manuals. It’s been fun and I enjoy using the old tools.
if anyone is interested I can try to put up some photos of these.
Posted: Tue Feb 28, 2012 5:58 pm
by MODIFIED
I got this behemoth 2 years ago.
I've yet plug it in... Currently, its occupation as a stool serves me well .
Posted: Tue Feb 28, 2012 7:48 pm
by wilfreeman
Looks like it might do a few helpful things!
Posted: Wed Feb 29, 2012 10:25 pm
by wesk
That is a Low Voltage Test set. I have an instruction pamphlet loaded on my photo album page. Grest unit used from the 50's thru the early 80's. STEICE replaced it and you can find the newer STEICE sets on the surplus market now. There were also Generator/Alternator test units, Coil Testers. Condenser/capacitor testers, and various VOM's.
Posted: Thu Mar 01, 2012 10:11 am
by AeroE
Modified: i have one of these batt-gen-starter testers also but it is missing the voltage sensing cables & some other cables. Any chance you could post pictures of the cables? I can probably make them after I see pictures.
Posted: Fri Mar 02, 2012 11:21 pm
by MODIFIED
Wes, if it wasn't for this site and the download resource, I would have passed this gem for a paper weight
AeroE, give me a few days and I'll get some pics up for you.
Can anyone provide pics of the condenser/capacitor tester and coil tester with NSN #'s ?