Page 1 of 1

Can someone supply seat measurements for M-38???

Posted: Mon Apr 23, 2012 8:03 pm
by Jordan
Could one of you guys give me some measurements for M-38 seats?

I need height of seat from bed area behind seat, to top edge of cross bar at top of seat back.

I also need distance from floor in front of driver's seat to bottom edge of seat bottom.

The reason I need these measurements is my M-38 does not have a fuel tank or toolbox. So, I am making custom seat mountings and I need to double check measurements.

Any assistance is greatly appreciated.

Jordan

Posted: Tue Apr 24, 2012 9:11 pm
by Jordan
Bump. Anyone?

Posted: Wed Apr 25, 2012 7:28 am
by skyjeep50
Hope this helps, my M-38 isn't the straightest jeep. Floor to top of seat back on pass. side 23.5", driver's side 24.5" (my driver's side is a little higher because I needed clearance for a repo fuel tank). Floor to front bottom of seat on driver's side is about 10" - fuel tank is in the way so I added floor to tank top and tank top to seat bottom distances.

Posted: Wed Apr 25, 2012 8:47 pm
by Jordan
Thanks very much. I appreciate it.