plug wires
Posted: Tue May 08, 2012 8:49 pm
installed the nos plug wires for my a1, notice the copper is pulled from the metal sleeve on a couple wires. can you solder these back into the sleeve and be ok?. thxs
Page 1 of 1
Posted: Wed May 09, 2012 5:34 pm
anyone?
Wires
Posted: Wed May 09, 2012 6:00 pm
There are cables on the inside that I would remove (look at the parts manual) and I would hit with a butane torch to get hotnenough fast. Slide the rubber sleeve back as far as possible and wrap with a rag. My two cents.
Posted: Thu May 10, 2012 2:54 pm
here's the cable im talking about. im thinking it can be resoldered back into the metal couplin. 
Posted: Thu May 10, 2012 3:30 pm
here we go.
Posted: Thu May 10, 2012 7:34 pm
Was the inside of the coupling tinned? If the inside of coupling isn't tinned with solder also you won't get a good bond and the cable won't be water proof. Looks like whom ever put it or those together did not take time to do that. That is how it appears to me.