willysmjeeps.com

I give up! What is the proper way to assemble the components of the transfer case mount?

Picture DEFINITELY appreciated, showing xfer/frame/components.

Thanks, Folks!

Walcks has a picture of it on their site.

http://walcks4wd.com/transfer-case-moun ... -d-18.html

The cross member is sandwiched between the smaller rubber piece and the larger steel cup. The smaller steel cup and rubber are under the cross member and the mounting foot on the transfer sits on the larger rubber piece with the bolt coming up through the mount assembly and through the mounting foot.

This is what was on my M38



These are the replacement parts (identical). I believe the smaller piece inserts from UNDER the crossmember, and this:



assembled like this, from the top.

But I've forgotten, so this is a guess

Correct, same as WW2 jeeps:


Couldn't find a photo from the underside of the crossmember though.
Owen.