Page 1 of 1
24v distributor
Posted: Sun Sep 09, 2012 11:49 am
by Nuffe
I have my 24 v sealed distributor completly
taken apart, thanks to recieved informations.
There is a little spring "anti rattle spring"
( under the breaker plate)
part RR on fig 153 on page 241 in given instruktion.
The anti rattle spring is broken, !! Where can I find one and
wher shall it fit??
regards
thomas
Posted: Sun Sep 09, 2012 1:11 pm
by chrisk
Which vehicle and which manual?
Chris
Posted: Sun Sep 09, 2012 3:17 pm
by wesk
It's the same anti-rattle spring for the M38 and the M38A1 distributor. Goes around the sahft and applies spring load to flyweights of the governor to kepp them from chattering. Tough to describe. Will have to find a photos.
Posted: Sun Sep 09, 2012 9:21 pm
by wesk
Here's the spring:
I have loaded photos of the install stepos in my photo album:
http://www.willysmjeeps.com/v2/modules. ... _album.php
Posted: Mon Sep 10, 2012 7:22 am
by Nuffe
Thank you sir...
i think I understand
I look for a new spring or I have
to make one.
nice to have your answers so quickly..
thomas
Posted: Sat Sep 15, 2012 1:23 am
by wesk
I found a new spring at:
http://willysdistributors.com/index.html
Just email him the part number.
Posted: Sun Sep 16, 2012 3:30 pm
by Nuffe
Hi
thanks
This is excellent....
Thanks for your service
very much
Thomas Bjorkman
M38