Page 1 of 1
m38 accelerator parts
Posted: Fri Oct 19, 2012 10:42 am
by baios
Please what is shown in the picture I have all of them!!!
BUT I DONT KNOW WHAT IS THE OTHER PART THAT GOES TO THE ENGINE FROM THIS PEDAL PARTS!!
Posted: Fri Oct 19, 2012 11:02 am
by Bretto
Thats not the proper post off the pedal. That looks like a 2A or MB set up The M38 used a straight post that mated to a rubber socket. I'll try to find a pic and post it.
The throttle linkage is bolted to the aft end of the block there and that small nub on the end of that flat link is the rubber socket the pedal goes into.
Posted: Fri Oct 19, 2012 11:09 am
by frankthecrank58
if you go to the download section of this site and download the TM 9-8012 manual and go to pg.157 you'll find a diagram. i think this is what you're looking for. cheers, frank
Posted: Fri Oct 19, 2012 1:38 pm
by baios
please where can i found that rubber socket????
Posted: Fri Oct 19, 2012 1:52 pm
by Bretto
I know a few vendors in the US, dont know about Greece.
John @ MidwestMilitary
Peter Debella
Posted: Fri Oct 19, 2012 3:06 pm
by chrisk
Hi Baios,
Do you mean the Boot or Seal part#WO-646073?
I have fresh production of this parts. Let me now.
Chris