Page 1 of 1

Help my M100

Posted: Fri Nov 30, 2012 9:08 am
by Standa
Hello,

Will you help me to identify my M100?
I do not know why I have no case for the connection cable between the trailer and car.
I have a hole in the drawer, but I case holders.

Image

Image

Thank you Standa

Posted: Fri Nov 30, 2012 1:34 pm
by wesk
Hello,

The M100 you have is a very stock Army unit. The box has been removed and the inter-vehicle cable is missing. The data plates on the front panel can be cleaned with DOT3 brake fluid which will not damage the plates but will lift the paint easily.

Here are a few of my notes on your photo:
Image

Posted: Fri Nov 30, 2012 2:55 pm
by Standa
I cleaned the plate and color.
Box was there. Someone removed.
The label should be the manufacturer: Dunbar Kapple
Serial number: 006379
Date of delivery: 1951

Image

Image

Image

Posted: Sat Dec 01, 2012 11:31 am
by Standa
Where can I buy the dock?
More information on the picture.
I would also buy cable, safety chains.

You are not drawing casing so I could make it?

http://g503.com/forums/download/file.php?id=36856

Posted: Sat Dec 01, 2012 2:07 pm
by wesk
Image
The receptacle assembly (Dock) is Army Ordnance part number 7525173 or Bendix Scintilla PN 60-36028-51P, or NSN 5935-00-752-5173 or 5935-00-846-3883 , which is included with the complete early M100 harness assembly Army Ordnance PN 7328380, Dunbar Kappel PN 73-1610, or NSN 5995-00-732-8380.The early M100 Intervehicle cable assembly is Army Ordnance PN 7728811, or Dunbar Kappel PN 73-1656 or NSN 5995-00-038-3914.
__________________________________________________________

You can run a RFQ with this outfit for the receptacle:
http://connectors.wbparts.com/connector ... 13590.html
or this company:
http://www.lintechcomponents.com/produc ... 5173/91971

__________________________________________________________

Here's a source for the early two plug cable assembly:
Image
Item# 7728811 $168.00
Product Description
Trailer cable which mates to vehicle's receptacle and trailer's receptacle. Consists of a male plug MS75020-1 and a female plug MS75020-2 and cable MIL-C-13486/12-1, 12 conductor cable. Cable is 72 inches overall length. All components made in USA. P/N 7728811. NSN 5995000383914.
8.5 lb
http://www.eriksmilitarysurplus.com/trcaica72in7.html
or:
http://www.barcarmfg.com/cable.html
or:
http://www.willysjeepparts.com/Trailer_Plug.htm
__________________________________________________________

Posted: Wed Nov 27, 2013 12:01 pm
by Standa
Hello,

It is possible to buy the socket?
Connection cable I bought, but I need this outlet. I can not get it anywhere :-(

Thank you Standa

Posted: Wed Nov 27, 2013 12:13 pm
by wesk
You will just have to shop the vendors. Ask for what you need by part number and stock number. I posted that info above last December.
The receptacle assembly (Dock) is Army Ordnance part number 7525173 or Bendix Scintilla PN 60-36028-51P, or NSN 5935-00-752-5173 or 5935-00-846-3883 , which is included with the complete early M100 harness assembly Army Ordnance PN 7328380, Dunbar Kappel PN 73-1610, or NSN 5995-00-732-8380.The early M100 Intervehicle cable assembly is Army Ordnance PN 7728811, or Dunbar Kappel PN 73-1656 or NSN 5995-00-038-3914.
__________________________________________________________

You can run a RFQ with this outfit for the receptacle:
http://connectors.wbparts.com/connector ... 13590.html
or this company:
http://www.lintechcomponents.com/produc ... 5173/91971
Image
This receptacle is not the same as the one on the back of the jeep. The one on the jeep has female sockets for the pins and the one on the trailer has male pins for the female sockets on the cable plug.

Image
The plug end on the left goes in the trailer receptacle and the plug end on the right goes in the jeep's receptacle.

Posted: Wed Nov 27, 2013 1:17 pm
by Standa
Yes I know.
I need a trailer to the socket:

Image

Posted: Thu Nov 28, 2013 6:31 pm
by BCA
I have a few of the sockets that mount on the trailer as shown in last photo. They have male pins. New original $15. Just the socket, with pins and pigtail wires. No cover doors. Easy to mail to Europe. PM me for details.
.... Brain

Posted: Thu Nov 28, 2013 7:58 pm
by wesk
Brian,

Does it have square steel plate shown above?

Posted: Fri Nov 29, 2013 6:01 pm
by BCA
My receptacle looks the same but has a part number 8376208 instead of the MS-number on the one in the photo. Many of these receptacles came without wiring, the rubber gland and rear nut; but mine have them. .... Brian

Posted: Fri Nov 29, 2013 8:35 pm
by wesk
Brian, That's the same receptacle.

National Stock Number:
5935-00-752-5173

Federal Supply Class:
5935

National Item Identification Number:
007525173

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL


Manufacturer Information:
12101-10 91340 MET-PRO CORPORATION

20859A 63810 WARNER ELECTRIC BRAKE AND CLUTCH CO HQ

3541 36024 LIBBY POWER SYSTEMS LLC

60-036028-51P (Original Bendix-Scintilla #) 77820 AMPHENOL CORPORATION DBA AMPHENOL AEROSPACE INDUSTRIAL DIV AMPHENOL AEROSPACE

60-036030-51P (Original Bendix-Scintilla #) 77820 AMPHENOL CORPORATION DBA AMPHENOL AEROSPACE INDUSTRIAL DIV AMPHENOL AEROSPACE

7525173 (Original Ord. Part #) 91971 NELSON MANUFACTURING CO INC

8376208 19207 U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM

8376208 53335 UNIVERSAL LOGISTICS CORP CLARK DIV

BG26996 18990 EAGLE CRUSHER CO INC

D7649-3 94833 KECO INDUSTRIES INC.

DKI 73-1615 (Original Dunbar-Kapple #) 98769 SENIOR OPERATIONS LLC DBA SENIOR AEROSPACE SSP DIV SENIOR AEROSPACE SSP

MS75021-1 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

MS75021-1P 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M