willysmjeeps.com

Anyone have any pictures of how the fowarding cables hook at the carb base and to the valve next to the oil filler tube???????
Also what direction they take on top of the motor????

Which model jeep do you have? You can insure we always know what model you are asking about if you go to your profile and add the model of your jeep to your posting signature block.

Sorry The jeep is a 1952 m38 The serial number is around 64800 range as i dont have that info in front of me right now

There are over 14 illustrations in the M38 Operator's & Maintenance manual TM 9-8012 that illustrate those two cables. If you do not have a copy of that manual you can download it free right here on our downloads page.
http://www.willysmjeeps.com/v2/modules. ... tit&lid=90

Here are several illustrations from that manual.

I'd like to see a drawing or close-up photo of the support strap
fig 44 part E. Mine's missing. Should be easy enuf to fab 1 up tho..

Before i ask that favor i better check my ORD9 1st!!

Here's an end view:


Left rear view


Front view:

Thx Wes-can see it, simple enuf part. I think i found it in
ord 9 as part 7375171 in group 304.5 but no illustration
available.

Yep, I knew there were none.

With the photos you can get close enough that no one will be able to call you wrong. A pair of dividers to scale it and your eyeball is all it takes.

MANY THANKS
That is just what i needed!!!!!
Maybe one of these days i will get this jeep all back together
Also will get the serial number and hood number in my signature block

Don't forget to download the M38 manuals that are free on this web site and will answer 95% of your questions.