willysmjeeps.com

I have a 3/52 m38 and need a 2 wire set up. Is bendix correct? Do I need one to ground to the fender or to the frame? where can I get one and a price?
thanks

It's called a slave receptacle ORD# 7731421 and sells as a kit. I don't know anyone stocking the correct M38 cable length. The most common kit out there has a 40" + cable and 11" - cable. The + wire goes to the starter switch terminal on the starter. The - wire goes to the front support bolt for the starter. If you can get a receptacle then make your own wires from 2 AWG cable. The + cable is 29" and the - cable is 33".

Also remember they came in early and late receptacles as in single pin or two pin (both of which have two cables).

bendix is the proper early one for show, but there all the same

I've got one for sale-PM if you're interested i will get
you particulars and pics..