Slave cable wiring locations
Posted: Tue Jul 02, 2013 5:27 pm
Currently am wiring up my '51 M38. The harness is well documented. All I can find on the slave cable unit is a overhead view and poor visual quality. Under the cap of the slave, it's marked + - . Where do the flat soldered ends bolt to? Both in the under hood battery box????? I see where the main battery cables go so that's not a issue. Thanks in advance! John
duh! + cable to the + 24 volt terminal on the starter, and - to the front starter mounting bracket to the block. + = 29 inches, - = 33 inches long. Thanks for the old posts! John