Page 1 of 1
Shackle Pivot Bearing
Posted: Fri Jul 12, 2013 7:31 am
by vuldub
Is this bearing pressed into the spring? I'm going to replace the spring shackles (two of the grease nipples are missing and threads stripped -won't take an new nipple) and thought it might be worth replacing the pivot bolt and bearing.
Posted: Fri Jul 12, 2013 8:26 am
by RICKG
Posted: Fri Jul 12, 2013 10:30 am
by vuldub
Yes, I have those diagrams.
In this one:
http://willysmjeeps.com/v2/modules.php? ... _photo.php
Specifically, is "J" pressed into the spring? Threaded? Loose?
Posted: Fri Jul 12, 2013 10:55 am
by RICKG
Press fit. TM9-1804B pg 150, par 138.
Posted: Mon Jul 15, 2013 7:49 am
by vuldub
RICKG wrote:Press fit. TM9-1804B pg 150, par 138.
Thanks,