Page 1 of 1
m38a1 fuel gauge
Posted: Thu Jul 18, 2013 4:15 pm
by tob
Has anyone change the fuel gauge in a m38a1 from 24 volt to 12 volt successfuly?? if you have do you have a source for the sender and the gauge? part numbers would be great. I built a street rod gas tank a number of years ago and used a universal adjustable sender but don't remember where I got it. it used a stewart warner gauge. I bought a gauge and sender from kaiser willys inc(should have know better) and its not even close,would show empty at more than half a tank, thank you. mike
Posted: Thu Jul 18, 2013 4:39 pm
by wesk
You can search this site for the many different posts on this same topic:
http://www.willysmjeeps.com/v2/modules. ... uge+sender
http://www.willysmjeeps.com/v2/modules. ... uge+sender
This one is your original post on the topic.
http://www.willysmjeeps.com/v2/modules. ... uge+sender
http://www.willysmjeeps.com/v2/modules. ... uge+sender
Exactly which part number gauge and sender you choose is up to you and you must decide based on your desires and needs. IE Gauge dial layout, color, lighting and etc.