Page 1 of 1
Seat Pan Bolt's size
Posted: Thu Aug 15, 2013 2:21 pm
by nealseale
I'm trying to find the correct size bolts for the driver and passenger seat pans, 2 in each pan, that attach the pan to the seat frame. On page 125-128 of TM9-2320-208 lists the bolts as part #455305, but I can't find where it states the actual size of the bolts. Is there a place that lists the actual size of the part numbers? Thanks!
Posted: Thu Aug 15, 2013 3:34 pm
by idiocrates
Right below the list of parts with the diagram or picture there is a group number where the parts can be found in the manual.....in this case its Group 18-Body and specifically section 1806. If you go to this section and locate the Ordnance Part No. in column 6, 455305 is listed as BOLT, MACHINE, assembled washer, hex-hd, split lock washer, header-pt, cd- or zn-pltd, 5/16-24UNF-2A-5/8....so basically its a 5/16"x24x5/8" machine bolt. Hope that helps.
Oh yeah.....and I got this info from the Ord 9 SNL G-758 List of All Service Parts which I believe is available for download from this site
Posted: Thu Aug 15, 2013 3:44 pm
by chrisk
See also ORD9 SNL G-758, page 309, Fig 18-10 and 18-11 position H.
After that see page 331, Bolt,mach.,assembled washer,hex-hd,split lockwasher, 5/16"-24UNF x 5/8".
Chris