Page 1 of 1
Thermostat for m170/ m38a1
Posted: Thu Sep 05, 2013 4:23 pm
by bl5211a
Hello: what temperature thermostat should I use in my 1955 m170? Store has 160 or 180. Looks like original design is 148 to 155. So, I was thinking 160...?
Posted: Thu Sep 05, 2013 4:47 pm
by wesk
160 is a good choice for your neighborhood.
Posted: Mon Sep 09, 2013 9:35 am
by Cacti_Ken
I put a 180deg TS in my L134 because I thought (there I go thinking again), that it was better to run a little hotter than cooler, that is if the cooling system is operating correctly which it appears to be.
I have worried a little about it since it does get hot here in Texas.
In my case, Would it be ok or even better for the engine if it had 160deg TS in it?
Posted: Mon Sep 09, 2013 9:43 am
by bl5211a
I put the 160 In since manual indicated a 155 opening. Its also a fail safe,meaning it will fail in open position. Jeep is still a couple years away from running, so i can not speak from experience yet..
Brian
Posted: Mon Sep 09, 2013 10:04 am
by wesk
The rule of thumb is 160 in warm climates and 180 in cool climates. In both cases a not so healthy cooling system can result in serious damage to the engine.