Page 1 of 1
Oil pan skid plate
Posted: Thu Sep 26, 2013 4:31 pm
by leecarr
Other than the skid plate, is a civilian oil pan the same as an M38? If so is there any place I can get dimensions of the skid plate soI can make one? Also if I could get dimensions for the trans. skid plate I could make one of those.
Re: Oil pan skid plate
Posted: Thu Sep 26, 2013 7:46 pm
by jimm
leecarr wrote:Other than the skid plate, is a civilian oil pan the same as an M38? If so is there any place I can get dimensions of the skid plate soI can make one? Also if I could get dimensions for the trans. skid plate I could make one of those.
If you're patient and don't get a better offer, I can make you drawings based on the plates on mine. I have the chassis restored, with the trans plate bolted on, and the engine out with the oil pan currently about an inch off the ground, so I'd have to hoist it up to get the measurements. PM me if you don't get what you need from someone else.