Power recepticle bracket
Posted: Sat Oct 12, 2013 8:38 am
Can someone post some pics and dimensions of the fender mounted recepticle L-bracket?
Thanks,
Brett
Thanks,
Brett
Midwest Military has new brackets in stock for $20.
John
Page 1 of 1
Posted: Sun Oct 13, 2013 7:42 am
Posted: Mon Oct 28, 2013 8:41 am
Got the bracket made up and installed with the receptacle.
Thanks again to RickG for the measurements.
Now I am in the works of getting the cables made up.
In regards to the advise on avoiding getting 24V applied to my 12V system, I came up with a sensible solution. Instead of making an outwardly placard to indicate 12V, I thought I would cover the receptacle and mark it that way. I found that a lid off a McCormick seasoning jar fits perfect inside. Then I just marked it "12V" that way.
Thanks again to RickG for the measurements.
Now I am in the works of getting the cables made up.
In regards to the advise on avoiding getting 24V applied to my 12V system, I came up with a sensible solution. Instead of making an outwardly placard to indicate 12V, I thought I would cover the receptacle and mark it that way. I found that a lid off a McCormick seasoning jar fits perfect inside. Then I just marked it "12V" that way.
Posted: Mon Oct 28, 2013 8:46 am
Can't miss the red "shield".
Posted: Sat Mar 21, 2015 5:01 pm
Bretto, you can post the dimensions of the bumper mounted recepticle L-bracket?
I need make my support, because I can not find to buy in Brazil.
Thank you very much.
Alexandre
I need make my support, because I can not find to buy in Brazil.
Thank you very much.
Alexandre