Page 1 of 1
trailer receptacle assy
Posted: Sun Nov 24, 2013 8:25 am
by Bretto
I realized I never got the bracket, with the 3 protruding tabs, that sits behind the receptacle assembly and will be making one. But I was curious of what it's purpose was. The only thing I could think of was to somehow act as a guard?
Thanks RickG for pic, I plucked this from your gallery.
Thanks,
Brett
Posted: Sun Nov 24, 2013 8:35 am
by evanso1975
That's the polarizing bracket. This old post may help:
http://www.willysmjeeps.com/v2/modules. ... polarizing
Posted: Sun Nov 24, 2013 8:40 am
by Bretto
Thanks Owen.
Posted: Sun Nov 24, 2013 11:25 am
by Bretto
Are the 2 side tabs slightly off of center? I can see that the middle tab is centered but the other 2 look a bit off to one side. And also are they all about 1" wide?
Thanks
Posted: Tue Nov 26, 2013 4:23 pm
by Bretto
Posted: Tue Nov 26, 2013 9:02 pm
by wesk
That's the original Willys installation and the TB 9-904-9 rotates that 90 degrees to the right (CW).
trailer receptacle assy
Posted: Wed Nov 27, 2013 6:57 am
by billybob
Darn it, just something else I have to copy [steal] from Bretto. Anyhow thanks for the good pictures.
Posted: Wed Nov 27, 2013 8:49 pm
by Bretto
No problem
trailer receptacle assy
Posted: Wed Nov 27, 2013 9:30 pm
by billybob
Thanks again Bretto, I admire your pride in your work and your workmanship.
