Page 1 of 1
oil pressure gauge
Posted: Wed Jun 07, 2006 7:53 am
by remi_emond
can I replace a 0-60psi oil pressure gauge by a 0-120psi? Is the sending unit have to be matched to the gauge?
Posted: Wed Jun 07, 2006 8:37 am
by GregS
Yes, they have to be matched.
Posted: Thu Jun 08, 2006 7:08 pm
by Cacti_Ken
I bought a used a 0-120psi oil press. sender. It only regesters 35 on the 120psi gauge. I know the pressure is higher than that.
Does someone still sell new 0-120psi sender? It isn't a priority right now though. I still have to find out where my oil drip is coming from.
Posted: Sat Jun 10, 2006 9:43 pm
by Bob_C
Hi Ken,
I got my 0-120 Guage from AJP. They have repro new ones.
Posted: Sun Jun 11, 2006 8:23 pm
by Cacti_Ken
How about the sender Bob? Did you have to buy one of those also?
I did find out that the rear seal is where the oil leak is coming from.
When I can I will take the engine back to the rebuilder and find out what he has to say about it.
I have overhauled engines before myself and never had one leak.