Page 1 of 1
pto and winch
Posted: Mon Dec 30, 2013 8:48 pm
by bobatwarsaw
hi all
anyone have a pto and winch on their m38?
thanks bob
Posted: Tue Dec 31, 2013 8:46 am
by bbloom
I have one.
winch
Posted: Tue Dec 31, 2013 9:49 am
by buzzk
I have one not installed yet I have the winch, frame, hanger bearing and lockout The winch is a Y 50 R streached to fit the jeep Buzz
Posted: Tue Dec 31, 2013 10:18 am
by Bill_F
I have a ramsey 50 on my m38 as well.
Posted: Tue Dec 31, 2013 11:50 am
by Bretto
Wish I did
Posted: Tue Dec 31, 2013 11:56 am
by RICKG
Bretto wrote:Wish I did
Me Too
Posted: Tue Dec 31, 2013 1:36 pm
by DanS
Working on mine for my originally winch equipped M38! More money to spend!
Dan
Posted: Tue Dec 31, 2013 8:22 pm
by bobatwarsaw
is there anyway that the ones that have can post some
pictures. i have a ramsey, but its not a model 50
trying to see if i can make it work as well and look
proper
thanks bob
Posted: Tue Dec 31, 2013 8:32 pm
by bobatwarsaw
also was ramsey the only brand?
not koenig?
thanks bob
Posted: Tue Dec 31, 2013 8:33 pm
by wesk
Bob,
Take a look in my photo album. I have several hundred technical photos there that cover 95% of questions and troubles introduced to this board.
http://www.willysmjeeps.com/v2/modules. ... _album.php
In the winch case try my winch album:
http://www.willysmjeeps.com/v2/modules. ... _album.php
The Ramsey 50 is a military 3500 Lb winch and the Ramsey 50R is a military 5000 Lb winch. They are very similar in appearance and both fit the same winch mounting bracket. They were built by Ramsey for the military under a MilSpec. Same goes for the 105 Ramsey PTO. They are made to fit the M38's front winch mount frame and the M38's exhaust system.
If you go with a civvy winch/PTO then which winch/PTO you use will dictate how many modifications and what type mods you will have to make to the jeep or the winch/PTO setup.
The most common substitution is the Ramsey 200 series winch and the longer Ramsey civilian PTO. Both will need help fitting the M38. The 200 series Ramsey does not fit the stock M38 winch mounting bracket. You must fabricate your own.
Posted: Tue Dec 31, 2013 8:56 pm
by bobatwarsaw
thanks wesk
Posted: Tue Dec 31, 2013 10:38 pm
by Bill_F
If you do a search for on my user name you find photos of my winch. I have posted many.