I have a request for an M-38A1 Oil Line and I can find it in the SNL... PN 8328407, listed as Oil Sending Unit Line... But there are no dimensions listed in the event one must be made...
Problem is I do not know the dimensions to make the line...
I need to know size of the line 3/16", 1/4" and how long the line is... also what ends are on it; I am assuming inverted flares (you know what happens when you assume something)...
I do not need to know bends as it will be just a line and bent upon installation...
I have an M-38A1 in the drive, but it is too #@$%@ cold to be measuring lines outside... this week...
Thanks for any assistance you can give...
Dimensions Needed...
-
OKCM38CDN
- Jeep Enthusiast
- Posts: 530
- Joined: Thu Feb 16, 2012 6:00 pm
- Location: Del City, OK
Dimensions Needed...
Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
-
chrisk
- Contributor
- Posts: 119
- Joined: Sat Apr 21, 2012 6:00 pm
- Location: the Netherlands
Hi,
Here in the Netherlands it is the middle of winter with a daily temp. of +13 degrees Celcius.
The image contains the requested data.
Chris
See my Photo Gallery, Sinrisnekaf page 8
Here in the Netherlands it is the middle of winter with a daily temp. of +13 degrees Celcius.
The image contains the requested data.
Chris
See my Photo Gallery, Sinrisnekaf page 8
Last edited by chrisk on Fri Jan 10, 2014 6:21 am, edited 5 times in total.
2x 1956 M38A1(Nekaf);1954 1/4TON trailer,Polynorm(Dutch);1983 Honda VF750C (Magna)