Page 1 of 1
Distributor Spring m38a1/m170
Posted: Tue Apr 01, 2014 8:09 pm
by bl5211a
Hello:
Does any one know where i can purchase distributor governor weight springs? Part number AL-IGB-284?
Brian
1955 M170
Posted: Tue Apr 01, 2014 9:09 pm
by wesk
Do a search of this site. This was discussed less than a year ago. There were no sources for the correct springs and several substitutes were discussed.
Posted: Wed Apr 02, 2014 12:53 am
by chrisk
Brian,
I have the correct ones, but I live in the Netherlands.
PRESTOLITE spring set AL-IGB-284S (=2 pieces)
PM if interested.
Chris
Posted: Wed Apr 02, 2014 2:01 am
by wesk
Chris they are correct for the F134 in his M170. Do you have the other springs for the earlier L134 distributors? The set PN IGE24S or the individual springs IGE24.
Posted: Wed Apr 02, 2014 6:45 am
by chrisk
Wes,
You mean for the distributor IAU 4006UT?
This spring I did not, but if you need them,I can look for you in Netherlands.
Chris
Posted: Wed Apr 02, 2014 7:33 am
by wilfreeman
Hey Brian,
I think I was the one that had that thread going last year. I called around to all of the dealers. A couple of them had the springs but wouldn't sell them - they would only rebuild your distributor for $250 (or whatever the price was)! I know these springs are rare, but they can't be replicated?
On the other hand, Chris says he has them - buy them from him! He's a great guy and will get them to you VERY quickly. I think I got a cd from him in 9 days from the Netherlands!
Posted: Wed Apr 02, 2014 4:37 pm
by bl5211a
Chris, sent pm.
Brian
Posted: Fri Apr 04, 2014 1:16 am
by wesk
Yes Chris. I would like to obtain two or three pairs,
Posted: Fri Apr 04, 2014 3:43 am
by chrisk
Wes,
I'll see what I can do, it may take a while.
You'll hear from me.
Chris