Page 1 of 1
Ramsey military 50 & 50R winch system dimensions needed
Posted: Sun Jul 27, 2014 10:34 am
by wesk
Please post only good quality , readable illustrations of the part you need the dimensions for with a labeled key for responders to list dimensions against. See the first example below in the first reply. Try to use the ORD 9 SNL G-740 or _758 illustration or similar from another publication. Reference the part numbers. Responders should reply starting with the part number then simply list the requested dimensions using the call-outs listed by the original poster or offer a complete illustration with the needed dimensions.
Posted: Sun Jul 27, 2014 10:36 am
by wesk
Need dimensions for Brace PN RWM-148 ORD# 7994190
Posted: Sun Jul 27, 2014 10:42 am
by wesk
Please post dimensions for Shaft PN RWM-77
Posted: Wed Jul 15, 2015 8:18 am
by wesk
Posted: Mon Aug 31, 2015 6:26 am
by Bill_F
Wes,
I have the drive line disconnected on my winch set up right now. I am not the best measurement taker but will try to get you some of the info you are looking for.
Posted: Tue Jan 19, 2016 2:56 pm
by DanS
Anyone have any of this info to post? Bill F? Thanks
Dan
Posted: Wed Jan 20, 2016 7:40 am
by Bill_F
I will try to work on some of it this weekend
Posted: Wed Jan 20, 2016 12:15 pm
by DanS
Greatly appreciated Bill!
