Page 1 of 1

Emergency Brake Cable

Posted: Sat Aug 23, 2014 3:27 pm
by 4x4M38
I ordered an Emergency Brake Cable from Midwest Military.

Very nice piece, especially compared to the takeoff.
The experts will have to weigh in as to accuracy but if the takeoff is original, John appears to be right on.

Photo is below.
Image

http://willysmjeeps.com/v2/modules/gall ... _cable.jpg

Brian

Posted: Sat Aug 23, 2014 8:36 pm
by wesk
It would be very nice to see a photo of the two laid out straight side by side and a closeup of each of the ends compared flat and side by side.

Posted: Sat Aug 23, 2014 9:54 pm
by 4x4M38
I can do that Wes, although Bubba fried the brake drum end on the take off.
I have no idea what happened to it, but he had the wire just wrapped around the yoke.

8O

Posted: Sun Aug 24, 2014 9:52 pm
by 4x4M38
Midwest Military e-brake cable versus what's left of my takeoff:

Image

Image

Image

Posted: Mon Aug 25, 2014 12:31 am
by wesk
Your photos help a bit but still lack any detailed length comparison or any real close detail of the actual look of the housing (sheath) ends and cable ends.

Image

Image

Posted: Mon Aug 25, 2014 8:54 am
by 4x4M38
Hi Wes,
I can get the U clamp off but probably not the yoke.

It looks like the threaded end went the way of the dodo bird, then Bubba stuck what was left through the end of a makeshift yoke, then crimped a cable terminal to the end of it.

The sheath has also been damaged/cut off on one end.

The cable itself may be close, but I'll have to see if I can straighten it on the yoke end. I have no idea how they got the threaded end off.

I'll see what I can do.

Posted: Mon Aug 25, 2014 9:04 am
by wesk
That's ok. If she is butchered that far it would not make a good comparison to a new one for determining the accuracy of the new one.