Page 1 of 1
Rear seat dimensions
Posted: Thu Aug 28, 2014 7:49 pm
by OldDinger
I have searched to no avail. I need drawing/dimensions for the M38a1 rear seat frame. Any help would be appreciated.
Posted: Sat Aug 30, 2014 12:52 pm
by upsmike
I have a 1951 M38 seat. Would it be the same one that was in yours?
It has been recovered, but I can snap some pics and measurements for you if that would help
Posted: Sat Aug 30, 2014 1:16 pm
by wesk
The M38 and M38A1 use the same rear seat.
rear seat
Posted: Sat Aug 30, 2014 5:59 pm
by billybob
Thank You Wes. You just answered a question that I was wondering about.
Posted: Sat Aug 30, 2014 7:51 pm
by OldDinger
Mike, that would be great. I used to make custom off road mini bikes and scooters, so I'll give the seat frame a try. I have a set of cushions coming from Beechwood.
I'll get 'em....
Posted: Tue Sep 02, 2014 10:41 pm
by upsmike
I'll get ya some pics hopefully Wednesday!
seat....
Posted: Wed Sep 03, 2014 9:49 pm
by upsmike
The Back is 14" high by 31" wide
The seat is 17" deep by 31" wide
Someone has covered all the seats in black pleather....
(alt+p)
(alt+p)
(alt+p)
Posted: Wed Sep 03, 2014 11:39 pm
by wesk
That is a very heavily modified seat.
Here's a stock seat.
rear seat
Posted: Thu Sep 04, 2014 9:08 am
by billybob
I too would like some more detailed measurements, such as where to make the bents etc. It doesn't look that difficult to make. With just a few measurements and straight ahead photos it can be scaled and copied. Thanks to anyone willing to help. Robert.
