willysmjeeps.com

The 4 prong pin has 4 wires attached to the VR. I can't find any diagram specifically from each prong, where that wire goes. I am wiring this back to 24 volts but the PO already removed all the wiring. If anybody can help would be appreciated. Oh, another question: how does the spark plug wires attach to the spark plugs? Looks like a fitting should be at the ends of the wires but mine appear to be missing. I should post some pictures to help me explain all this. Thnx!!!

Yes, a picture is worth a thousand words. That is why I have several tech photos for you to use anytime you have a question in my photo album:
http://www.willysmjeeps.com/v2/modules. ... _album.php

Specifically to answer your first question is this one:



And your second question let's start with a description of the correct cap. lead and plug. They are called a shielded ignition system. The braided shielding primary purpose is to reduce radio noise. A secondary benefit is water proof.


Tese are the correct type shielded plugs


This is the correct cap and wires.


This is the correct attachment to the plugs.

Thank you so much!!!! This really helps!!!