willysmjeeps.com

Hi all i try to find some dimension to rebuild part on my M38A1CND 1953

1) Seat conductor, pass and rear dimension
2) Regulator shield plate
3) Guard under the crank pulley
4) bracket to support the generator
5) bracket for the steering box
6) hook on the cross member

I take measurement for the T-wire marker used on the Harness
maybe this info can help someone you wan't to make the harness

Macgiver !

Hi MacGiver,
I am a little confused with your request due to both mechanical and what appear to be electrical descriptions in your post.

Please look in Photo Gallery under Wes' photo pages. He has many photographs and information on the M38A1. I believe I have seen both photos and dimensions for the regulator shield plate, as well as generator support brackets. I believe I also saw steering box bracket info, but may be thinking of the bellcrank.

Also, seat conductor. Is this a bracket to attach the rear seat, or something electrical?

Thanks,
Brian

Sorry for the confusion

Step1: Dimension for the regulator splash plate width , length and metal thickness

Step2: Dimension for the shield plate under the steering box

Step3: Dimension for the three seat

thank's