Page 1 of 1
Mirror Bracket & Holes
Posted: Tue Aug 01, 2006 8:33 pm
by Cacti_Ken
The Mirror bracket you see in the photo with the Arm is what I took off my jeep body. the two small brackets I acquired from my brother. However I think it is missing some parts for the correct mirror bracket.
I don't believe the bracket I removed from the jeep is correct because the holes in the tub did not exactly fit the bracket. But it was bolted to some of them and was usable.
I would like to know what attaches to the holes in the next photo.
Posted: Wed Aug 02, 2006 3:25 am
by maeserik
a picture of mine :
sorry, on this the pic the doorgliders were not installed yet
Erik
Posted: Wed Aug 02, 2006 4:40 am
by BobW
Here is my M38
Posted: Wed Aug 02, 2006 8:20 am
by maeserik
i found a better pic
Erik
Posted: Wed Aug 02, 2006 9:26 am
by Cacti_Ken
Well, from your pic there Maeserik I have some extra holes. #3, 4,& 5.
And The bracket in my photo which was on my jeep tub is incorrect.
So looking at your mirror setup, I need another part to go with the two small brackets to make a complete bracket.
Posted: Wed Aug 02, 2006 6:35 pm
by BobW
I think #3 is an extra hole. 4+5 are for the door channel.
Posted: Wed Aug 02, 2006 6:53 pm
by Ryan_Miller
I agree. # 3 is probably a bubba's extra hole.
Posted: Wed Aug 02, 2006 7:01 pm
by Cacti_Ken
That's not to bad then, One extra hole.
Posted: Wed Aug 02, 2006 8:26 pm
by wesk
Posted: Thu Aug 03, 2006 1:15 am
by maeserik
John Bizal midwestmilitary has them !
I bougt several parts there, and always good quality and original !
In Europe we have supliers in the UK, but they are expensive there !
