Page 1 of 1
locking hubs
Posted: Tue Feb 03, 2015 2:24 pm
by 4x4M38
I have a pair installed when I bought the jeep. No name or any other identifier, except for lock and free around the circumference and a little less than 90 degrees apart.
One has a red plastic disc and the other white.
Any idea who made them?
Thanks
Posted: Tue Feb 03, 2015 2:34 pm
by 4x4M38
Ebay. My encyclopedia for parts lookup.
They look like this, except the lock and free are in reversed locations.
http://www.ebay.com/itm/NOS-Locking-Hub ... c5&vxp=mtr
Posted: Tue Feb 03, 2015 8:35 pm
by wesk
If you would have looked half way down that link's page you would of seen the set with the Lock - Free opposite matching yours.
http://www.ebay.com/itm/Chevy-Dodge-For ... 2229&rt=nc
Posted: Wed Feb 04, 2015 8:56 am
by 4x4M38
I saw them Wes.
I still don't know who made them.
Posted: Wed Feb 04, 2015 9:50 am
by wesk
Look like cheap offshore knockoffs/copies of Warn.
Posted: Wed Feb 04, 2015 10:15 am
by 4x4M38
It does not surprise me. Appear to be chrome with several layers
of paint on top. One photo shows plastic inside. They turn fairly
freely. For now, I guess just put them in line for a take apart.
Thanks Wes.
Posted: Wed Feb 04, 2015 1:29 pm
by baios
the point is if they fit for our m38?
Posted: Wed Feb 04, 2015 2:30 pm
by 4x4M38
Hello Balos,
I have a pair on my M38 at present. They were installed when
I bought it. I cannot say if they are the same ones as on
EBay but they look the same. If for a Dana 44 they should fit, right Wes?
Posted: Wed Feb 04, 2015 3:22 pm
by wesk
Dana 44 came in 10 spline M38 and early Jeep through about 72 and came in 19 spline later jeep.