There are two holes in the rear of the block of the m-38 engine for fastening the accelerator linkage bracket to the rear of the block. What is the hole diameter and thread pitch of those holes? Neither 1/4 fine or coarse bolts seem to want to screw into those holes on my block.
Thanks,
Jordan
M-38 ??: Accelerator linkage on rear of block: bolt dia.?
-
Jordan
- Contributor
- Posts: 93
- Joined: Fri Jul 10, 2009 6:00 pm
-
wesk
- Site Administrator
- Posts: 16468
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
You must have run a tap or thread chaser in each and found that they are indeed 1/4x20NC-3x9/16".
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php