my a1 seems to be leaking gear oil from the pinion seal, when i drive it, it throws oil all underneath the tub. when sitting it leaks but not a hugh amount. new seals and a new yoke was used when i had it rebuilt!
question?- is there anything else i need to look at that may cause this. thxs
leaking seal
- circleburner12
- Jeep Enthusiast

- Posts: 385
- Joined: Sun May 15, 2011 6:00 pm
- Location: arkansas
leaking seal
1953 m38a1 1953 m100
- idiocrates
- Jeep Enthusiast

- Posts: 437
- Joined: Thu Nov 01, 2007 6:00 pm
- Location: Seguin, Texas
- idiocrates
- Jeep Enthusiast

- Posts: 437
- Joined: Thu Nov 01, 2007 6:00 pm
- Location: Seguin, Texas
Oh yeah....and also look at the area just behind your rock deflector where the seal lip rides. If it has a noticable groove worn in it where the seal rides it will never work with the new seal and must be replaced, built-up and worked back down or have a redi-sleeve installed.
Jim
***********************
'?? - M38A-1
***********************
'?? - M38A-1
- circleburner12
- Jeep Enthusiast

- Posts: 385
- Joined: Sun May 15, 2011 6:00 pm
- Location: arkansas
- idiocrates
- Jeep Enthusiast

- Posts: 437
- Joined: Thu Nov 01, 2007 6:00 pm
- Location: Seguin, Texas
Just out of curiosity, exactly where is the oil being slung out....front or rear differential? Since I missed that part previously about the yoke being new I'm gonna bet its leaking down the splines. In any event....good luck....when mine leaked the only person i could yell at was.....well....me. But I am pleased to say I was eventually able to extort myself into fixing "most" of my leak?
Jim
***********************
'?? - M38A-1
***********************
'?? - M38A-1
- circleburner12
- Jeep Enthusiast

- Posts: 385
- Joined: Sun May 15, 2011 6:00 pm
- Location: arkansas