M38 Fender mounted B/O drive light questions

SledDog · Post by **SledDog** » Mon Jan 21, 2013 8:59 am

I've taken apart the Fender mounted B/O light but can't figure out how to remove the inner lens assembly to remove the bulb. Any suggestions? I can post some pics if that helps explain what I'm attempting to do.

skyjeep50 · Post by **skyjeep50** » Mon Jan 21, 2013 9:09 am

The inner lens shield, hood and light assembly are manufactured as a unit. You can pry them apart but the entire bulb assembly w/ cover are supposed to be replaced as a whole.

Post by **wesk** » Mon Jan 21, 2013 9:36 am

This is the lamp assembly as you would recieve from the parts house.

You can buy replacements here:
http://www.saturnsurplus.com/lights/lights.htm

SledDog · Post by **SledDog** » Mon Jan 21, 2013 9:47 am

That makes sense. Thanks for the link.

oldgreentrucks · Post by **oldgreentrucks** » Mon Jan 21, 2013 5:29 pm

I have successfully drilled a 1 in hole in the back of a bad lamp and inserted a license plate style light. A little gasket sealer and good to go. Sometimes we spend way to much time on a project... But it works well.
Jim

M38 Fender mounted B/O drive light questions

M38 Fender mounted B/O drive light questions

lamp project?