Whats the trick to replacing driveshaft slip joint grease seal? No sure how to get the old seal over the splines? Also is there a source for new seals?
Brian
m170 driveshaft slip joint grease seals
-
bl5211a
- Jeep Enthusiast
- Posts: 344
- Joined: Wed Dec 27, 2006 6:00 pm
- Location: NC
m170 driveshaft slip joint grease seals
Brian
1955 M170
1940 BSA M20
1955 M170
1940 BSA M20
-
wesk
- Site Administrator
- Posts: 16467
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Shouldn't need any tricks. The seal is a cork split washer and the backup ring is a split steel washer as well. Just open and spread at the split and slip over skinny part of shaft. Slide the threaded cap on first! I didn't see any listed ant where. The dimensions are given in the ORD 9
Page 207 - 8333061 Seal, plain rubber split, 1" ID x 1 37/64" OD x 5/16" Thick. supersedes 7702465
Page 208 - 7772465, Washer, split cork 1" ID x 1 37/64" OD x 5/16" Thick. Superseded by 8333061
Walck's has the civvy felt sleeve which should also work:
For $2.05
Page 207 - 8333061 Seal, plain rubber split, 1" ID x 1 37/64" OD x 5/16" Thick. supersedes 7702465
Page 208 - 7772465, Washer, split cork 1" ID x 1 37/64" OD x 5/16" Thick. Superseded by 8333061
Walck's has the civvy felt sleeve which should also work:
For $2.05
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php