Question about the tailgate on the M38. Was is bolted shut or was it held close by the chains or did it have both?
Thank you
M38 tail gate
- JahRafa
- Member
- Posts: 39
- Joined: Fri Sep 09, 2016 6:00 pm
- Location: Florida
- 4x4M38
- Jeep Legend

- Posts: 3487
- Joined: Thu May 29, 2014 6:00 pm
- Location: Texas Hill Country
- keats
- Jeep Enthusiast

- Posts: 342
- Joined: Wed Apr 13, 2005 6:00 pm
- Location: Middletown Ct
the bolts holding the tailgate closed were special for that as seen in my photo section.
http://willysmjeeps.com/v2/modules/gall ... .sized.jpg
http://willysmjeeps.com/v2/modules/gall ... .sized.jpg
Gary Keating
1949 C3A, 1952 M38,
1954 M170, 1957 Cj3B
1949 C3A, 1952 M38,
1954 M170, 1957 Cj3B
- JahRafa
- Member
- Posts: 39
- Joined: Fri Sep 09, 2016 6:00 pm
- Location: Florida
- 4x4M38
- Jeep Legend

- Posts: 3487
- Joined: Thu May 29, 2014 6:00 pm
- Location: Texas Hill Country
There is one on eBay right now but I'd try Midwest Military, Army Jeep Parts
or another of the vendors first.
Note most everybody has a minimum
shipping charge. For that and the size of the
box, look around for a few other items you need
and buy at the same time to make the freight
reasonable.
Take care,
or another of the vendors first.
Note most everybody has a minimum
shipping charge. For that and the size of the
box, look around for a few other items you need
and buy at the same time to make the freight
reasonable.
Take care,